Issue
- Washing machine basic installation guide
- How to do the basics!
Applies to
- Washing machines
- Washer dryers
Resolution
WASHING MACHINE QUICK INSTALLATION GUIDE
The Key Steps
There are really only five main steps involved (for UK machines).
- Remove the transit bolts.
- Attach the fill hose.
- Attach the drain hose, ensure there are no kinks.
- Check the machine does not rock – level it if required.
- Plug in and switch on.
Quick step by step guide
1: Remove the transit bolts and replace them with the blanks provided.
2: Connect the cold water pipe to the cold water tap,
3: Connect the waste water pipe to either a stand pipe or to a connection under the sink. Ensure there are no kinks in either pipe.
4: Plug the appliance into a standard socket and check the appliance is level using a spirit level. If not, raise or lower the feet as necessary.
5: Switch the appliance on, run a rinse programme and check for any leaks. If none are found, push the appliance into its final position.