Tumble dryer does not stop when the cycle is finished

Last updated 12/06/2019 11:30

If the tumble dryer does not stop when the cycle is finished, this may be because of the “anti-crease” phase.

  • If the tumble dryer continues running in this phase for about 1 hour and can be stopped manually.
  • Turn the cycle selector to the Off position.

If the cycle runs much longer than 2-3 hours:

A cycle with a maximum drying level normally takes up to 2-3 hours.

  • The bed-linen cycles last longer.
  • There can be a problem with measuring moisture.

Possible causes:

  • Inappropriate grounding of the tumble dryer.
  • Connection by an extension cord.
  • Dirty felt tape / sensors in the drum. The drum and tape can be cleaned with vinegar.
  • Dirty filters, condenser or condenser compartment.

If the above does not resolve the problem, contact Authorized Service Center.

 

To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.

Book a repair
Book a repair

Need to arrange a repair technician visit? Repairs in warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.