SpinView® shelf replacement

Last updated 28/07/2022 10:09

Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

Always take care when moving appliances, for heavy appliances it's necessary two persons to move it. 

Always use safety gloves and enclosed footwear.

Please note that self-repair or nonprofessional repair can have safety consequences if not done properly


SpinView® shelf replacement


Removing the SpinView®shelf

The SpinView® shelf can be removed from the glass shelf for replacement or cleaning. To remove the shelf:

1. Lift the front of the SpinView® shelf upwards.

Word import image

2. Pull the SpinView® shelf in the shown direction to unmount it from the clamps.

Word import image

To remove the SpinView® clamps from the glass shelf supporting the SpinView® shelf follow the inverse steps described in the installation of SpinView®

Installing the SpinView®shelf

CAUTION! Clean the accessory with a soft moist cloth before first use. The maximum load allowed on the shelf is 15 kg.

1. Remove one of the glass shelves from the fridge.

2. Remove the back trim from the glass shelf.

Word import image

3. Slide in the SpinView® clamps on the glass shelf's back edge.

Word import image

4. Mount the SpinView® shelf. Make sure that the clamp pins fit into special indentations at the base of the shelf. Check if the SpinView® shelf is mounted properly by moving it gently forwards and backwards.

Word import image

5. Place the shelf with the clamps inside the fridge. Push the shelf until the clamps lock inside the compartment.

Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.