Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
Always take care when moving appliances, for heavy appliances it's necessary two persons to move it.
Always use safety gloves and enclosed footwear.
Please note that self-repair or nonprofessional repair can have safety consequences if not done properly
Removing and installing shelves - wine coolers
Removing shelves
The bottom part of the shelf is equipped with a pair of guides in the middle and a pair of hooks in the back.
To remove the shelf:
1. Open the appliance door completely.
2. Unhook one of the shelf's rear hooks.
To detach the shelf, it is enough to unhook only one rear hook
3. Lift the shelf slightly and pull it out of the appliance
Installing shelves
To put the shelf back into its initial position:
1. Push the rails on both sides into the appliance until they stop.
2. Insert the shelf diagonally to the appliance.
3. Position the guides on the rails.
4. Press the shelf down firmly to lock both hooks on the rails.
5. Several times pull the shelf out and push it back into the appliance, then once again press it down firmly, to check if it is hooked correctly on the rails.
6. Push the shelf back into the appliance.
CAUTION! Before placing any wine bottles on the shelves, make sure they are properly hooked.
Use the wooden shelves only to store bottles
Removing and installing shelves (60cm appliance)
Removing shelves
To remove the shelf:
1. Open the wine cabinet door completely.
2. Pull the shelf out.
3. Grab the shelf in the middle, lift it up slightly and take it out of the wine cabinet.
Installing shelves
To put the shelf back into its initial position:
1. Pull out the shelf's rails completely.
2. Position the shelf's rear mounts on the rails, so they are engaged on both sides.
3. Align the guides in the front.
4. Press the back of the shelf down firmly to check if it is placed and engaged correctly on the rails and push it back into the appliance.
CAUTION!
Before placing any wine bottles on the shelves, make sure they are properly engaged on the rails.
Check for the possible wrong shelf positioning:
