Dishwasher displays error message iC0 / iCo

Last updated 15/10/2019 08:58

Issue:

  • Dishwasher displays error message iC0, iCo, iC1, iC2 or iC3

Applies to:

  • integrated dishwasher
  • freestanding dishwasher

Resolution:

1. Reset your appliance.

  • Remove the plug for the dishwasher, wait 1 minute and plug it back in.
  • You can also turn off the power using the fuses on the panel/power switch.
  • If you have pulled the machine out and then pushed it back into position, it is important to ensure that no tubing is kinked or crushed and that the tap is fully open.
  • Turn on the dishwasher, select a suitable cycle and start it.
  • If the cycle starts and operates normally, the problem has been resolved.

2. Check whether the appliance displays the same error message again or whether it has changed.

If the appliance shows a different error code, check the code in the user manual for help troubleshooting the problem. 

Download user manual.

3. Contact an Authorized Service Center.

If the above advices do not resolve the problem, we recommend requesting a visit by a service engineer.

Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.

Was this article helpful?

service-electrolux

Book a repair

Out of warranty? Not a problem. We can arrange for a technician to repair your appliance for a fixed price where call out, parts and labour are covered without the worry of unexpected additional costs. Alternatively we can repair your appliance for a monthly subscription with a repair and care plan from Domestic & General Ltd.

Repairs for no more than £135 or £16.49 per month
Book a repair
spares-electrolux

Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.