- Oven / Cooker blows / trips the fuse
- Oven is not working, the display is blank
- Integrated oven
- Single Oven
- Double Oven
- Combination Oven
- Microwave Oven
- Freestanding cooker
Any issues with the power supply should be tackled by a trained Technician. For your own safety, we would not encourage customers to fix this themselves. Fuses can trip due to damage to cables, water, faulty installation, overloaded circuit or a number of other issues. You can book a repair using the link on the right-hand side of this page.
If the appliance has recently been installed or a new appliance has been added to your kitchen, this could indicate an installation error. In this instance, we would recommend contacting your installer or electrician.
How to check
To check which appliance is causing the fault
- Switch off power in the consumer unit
- Turn off as many other appliances as possible
- Switch the power back on at the consumer unit
- Switch the oven back on.
Is the appliance working as expected? This will determine if there is a fault with the oven or if there are too many appliances on the circuit.
If you have added a new appliance to your kitchen, this may be causing other appliances to trip. Please check using the technique above
Within an oven, there are a number of components that, over time, could develop a fault
The supply tripping indicates that a fault could be potentially harmful if the appliance or power supply are not put in a safe mode, i.e. tripped.
The only part we would suggest can be investigated with the appliance switched off at the mains is the oven bulb (or lamp)
Beyond this then diagnosing the issue with an existing appliance is best handled by a trained Technician. Due to safety reasons, we recommend arranging a repair.
Electrical appliances can present a risk of harm. Please don't attempt to investigate your fault unless you are qualified to do so.