Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433

Last updated 27/11/2019 11:36

Issue:

  • Hob displays one of the following error messages: E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433

Applies to:

  • integrated induction hob
  • freestanding cooker with induction hob

Resolution:

1. Remove either cold or hot cookware from the induction plate.
 
2. Disconnect the appliance from power for at least 30 seconds. 
Reconnect it and switch it back on.
 
3. Check if the error code disappear after cool down (residual heat indicator can stay).
 
4. To avoid the same problem in the future, cooldown your cookware and check if it is suitable for induction cooking.

5. Contact an Authorized Service Center.

If the above advice do not resolve the problem, we recommend requesting a visit by a service engineer.

Cause:

  • Error messages E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433 indicate that overheating protection for the cooking zone is operating
 

Was this article helpful?

service-electrolux

Book a repair

Out of warranty? Not a problem. We can arrange for a technician to repair your appliance for a fixed price where call out, parts and labour are covered without the worry of unexpected additional costs. Alternatively we can repair your appliance for a monthly subscription with a repair and care plan from Domestic & General Ltd.

Repairs for no more than £135 or £16.49 per month
Book a repair
spares-electrolux

Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.