Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433

Last updated 24/12/2021 09:45

Issue


Hob displays one of the following error messages: E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433.

Applies to

  • Integrated induction hob.
  • Freestanding cooker with induction hob.

Resolution

 

These error codes are an indicator that overheating protection is in operation, this may be due to an installation issue or by using unsuitable cookware. If the below steps do not resolve the issue, you must request a visit from a service engineer. You can do that by using the link on the right of this page.

 

  • Switch the hob off and allow it to cool by removing any cookware. The error code should disappear once the hob cools.

 

  • Please ensure the cookware you are using is suitable for induction. Induction safe cookware should be iron or iron based with a flat base for good conduction. 

 

If you found the following information helpful, please give us a thumbs up below. If this information did not resolve your question, all constructive feedback is welcome.

Book a repair
Book a repair

Need to arrange a repair technician visit? Repairs in warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.

Spare parts & Accessories
Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.