Issue
- How to clean the carbon filter in my hood?
- How long the carbon filters can be used?
- How to restore a long-life carbon filter?
Applies to
- Cooker hood
Resolution
How to change and maintain your Cooker Hood Filter
Please see the video below.
What is a washable filter and what does it look like
Please see the video below.
1. Standard carbon filters must be replaced approx. every 4 months or more often if the hood is used intensively.
- The saturation of the carbon filter occurs after more or less prolonged use, depending on the type of cooking and the regularity of cleaning of the grease filter. In any case, it is necessary to replace the cartridge at least every four months.
- Standard carbon filter may NOT be washed or regenerated.
- You can order a new filter, care products and accessories in our Webshop
- Replace the filters every 6 months depending on how saturated they are (refer to user instructions)
- Under normal circumstances, the filters need to be washed every 3–4 months, or more frequently with intensive use.
- If you use the cooker hood intensively, you should only wash long-life carbon filters a maximum of 5 times. In other cases, the filters can be washed up to 8 times before it is necessary to replace them.
- When the filters no longer absorb the smell from food preparation, you need to replace them.
3. Restoring long-life carbon filters:
- Put the filter in the dishwasher and use an intensive washing cycle at max. 70°C, without using any soap.
- The filter can also be rinsed under hot tap water, without using a sponge.
- Place the filter in the oven, when it has been drained.
- Set the oven to 60°C and keep the filter there for 7 minutes
How to clean your stainless steal Hood.
You can use our AEG / Electrolux/ Zanussi steal care cream, which is available on our accessory website.
If you are wanting more information regarding fitting a cooker hood filter then please click the LINK below which will take you to our website
Please click the LINK below to access our website for repairs or more information if needed